Leviton Push Lock Pins Instrucciones De Uso

1
2
Push Lock Pins
Patillas Push Lock
Tiges «push lock»
Instructions for Use
Push Lock Pins:
Push Lock Pins are intended for use with
Leviton's Structured Media System, for the pur-
pose of securing and locking brackets into place
inside an enclosure.
Push Lock Installation Instructions:
1. Insert a Push Lock Base securely into one of
the holes on the edge or corner of your
bracket. (Figure 1)
2. Insert a Push Lock Pin halfway into the Push
Lock Base. Do NOT click Pin fully into place.
(Figure 2)
3. Repeat with other holes.
4. You are now ready to install the bracket into
the Structured Media Enclosure.
Bracket Installation Instructions:
1. To install, position the bracket in the desig-
nated spot in the media enclosure, with Push
Locks lined up to the prepunched holes.
2. Push the Push Lock Pin all the way down to
lock into place. Repeat with other Pins until
the bracket is secured.
PK-93087-10-02-0A
1
2
Push Lock Pins
Patillas Push Lock
Tiges «push lock»
Instructions for Use
Push Lock Pins:
Push Lock Pins are intended for use with
Leviton's Structured Media System, for the pur-
pose of securing and locking brackets into place
inside an enclosure.
Push Lock Installation Instructions:
1. Insert a Push Lock Base securely into one of
the holes on the edge or corner of your
bracket. (Figure 1)
2. Insert a Push Lock Pin halfway into the Push
Lock Base. Do NOT click Pin fully into place.
(Figure 2)
3. Repeat with other holes.
4. You are now ready to install the bracket into
the Structured Media Enclosure.
Bracket Installation Instructions:
1. To install, position the bracket in the desig-
nated spot in the media enclosure, with Push
Lock Pins lined up to the prepunched holes.
2. Push the Push Lock Pin all the way down to
lock into place. Repeat with other Pins until
the bracket is secured.
PK-93087-10-02-0A