BMW R 1150 RS Instrucciones Para El Taller página 16

These instructions must be read carefully and thoroughly before beginning work. BMW accepts no
liability for damage caused by failure to observe the installation instructions.
This retrofit kit may only be installed by an authorized dealer with the required special tools. We hereby
draw attention to the fact that installation by unauthorized personnel may involve considerable risks to health.
Furthermore, in this case all guarantee claims shall become invalid. Equally, no liability claims against BMW AG
can be entertained.
The following symbols are used in these instructions for safety notes:
d
Warning:
Cautionary rules and measures
which can protect the driver or
other persons from injury or
death.
We offer our customers a wide range of tested accessories and special equipment. For this reason it is not
possible to cover all the possible variations in these installation instructions. Thus we have restricted our
description to correspond with the basic version of the respective model. The dismantling and assembly of
accessories is described in the respective instructions. If you no longer have the necessary instructions,
please consult your BMW motorcycle dealer.
Retrofit Kit Anti-Theft Alarm System for R 1150 RS
Contents of the Retrofit Kit
Cable assembly
Control unit with siren and receiver
LED with connecting cable
Adapter cable for LED
Motion detector
Remote control
Inductive key
Holding plate
Holder for the motion detector
Holder for the control unit
Connector shell, triple-pole
Connector shell, single-pole
Nut M4, self-locking
Nut M6, self-locking
Hexagon screw M6
Washer ø 6 mm, large
Washer ø 4 mm
Cable ties
Knob tape, self-adhesive
Double-sided self-adhesive tape
Operating instructions for anti-theft
alarm system
Installation manual
e
Attention:
Special notes and cautionary
measures which can prevent
damage to the motorcycle. Fail-
ure to observe these can result
in nullification of the guarantee.
2 pieces
4 pieces
3 pieces
15 pieces
2 pieces
16
L
Note:
Tips for facilitation of operation,
control and adjustment, as well as
maintenance work.