Safety System; Safety Valve; Safety Pictograms - Anest Iwata DDP 70 B Manual De Instrucciones De Uso Y Mantenimiento

DPS-70 C - DPS-70 CN DIAPHRAGM PUMPS

6.3 SAFETY SYSTEM

Several safety systems have been conceived during the diaphragm pump design and manufacture to safeguard the operator,
as it prescribed by all applicable safety regulations.
Release hole
WARNING
DO NOT DISASSEMBLE THE SAFETY VALVE. ANY TAMPERING WITH COULD BE
DANGEROUS FOR THE OPERATOR AND COMPROMISE THE EQUIPMENT GOOD WORKING.
EXHAUST VALVE
In case of anomalies during working, turn 90° the exhaust valve lever. In this way the air supply will be interrupted and the
residual pressure inside the pump will be released.

6.4 SAFETY PICTOGRAMS

Some pictograms can be found on the pump with the safety warnings to follow by anyone who is going to use it.
WARNING
THE MANUFACTURING COMPANY IS NOT TO BE HELD RESPONSIBLE FOR DAMAGE OR ACCIDENTS TO PEOPLE
OR THINGS COMING FROM THE NON-COMPLIANCE WITH THE PRESCRIBED RULES.THE RESPONSIBILITY RESTS
ENTIRELY WITH THE OPERATOR HIM SELF.

SAFETY VALVE

A 7 bar calibrated safety valve is installed to ensure the pump working pressure does not
exceed the limits inside the feeding circuit.
If the calibration pressure is exceeded, the valve opens by releasing the excess of air.
ON
EN
OFF
9