Maintenance - Health O Meter 500KL Instrucciones De Uso

MAINTENANCE

Maintenance
The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting of the 500KL scale. Maintenance operations other than those described in this
manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the total scale for any obvious damage, wear, and tear.
2. Inspect the AC adapter for cord cracking or fraying, or for broken/bent prongs.
Note: This scale is an extremely sensitive weighing device. If the auto-off function is disabled,
battery power will be consumed.
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.
1. Clean all external surfaces with a clean damp cloth. Mild antimicrobial or antibacterial soap
and water solution may be used. Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solutions.
3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.
4. Do not use abrasive cleaners.
Replacement Parts
Parts are available if a piece of the scale needs to be replaced. Contact Health o meter
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of
these replacement parts.
Part # Description
500HEADPIECE Headpiece for height rod
500KLKEYPAD Keypad overlay
500KLROD Height rod
500KLWHEELS Set of 2 wheels
500KLFOOT Foot for base
500KLMAT Replacement mat for platform
BATTDOOR500 Battery compartment door
500KLPILLARFOOT Foot for pillar
ADPT31 Power adapter
21