ENGLISH
PROGRAM
With this option, you can access operating speed setting for six time slots (with start and end times) for each day of the
week and for two pre-set intervals: Monday-Friday and Saturday-Sunday.
Proceed as follows for all desired days and time slots:
NOTE
At the specified intervals, however, the speeds can be changed manually in the "HOME" page, in that case: the message
"Prg" will flash for 30 minutes after which it will return to work at the speed set in the hourly programming, if during the
30
DATE&HOUR
PROGRAM
min any other function that modifies the speed intervenes, the 30 min count is reset.
MONDAY
Timeslot1
Timeslot2
Timeslot3
Timeslot4
Timeslot5
Timeslot6
NOTE
The time bands of MON / FRI or SAT / SUN overwrite the single days, during the setting change first the general time
bands, and then set the daily ones. If they are subsequently changed again, the LUN / VEN and SAB / DOM bands will
overwrite the daily ones.
Info
You can view the following system information with this option:
HMI, Board firmware, Configuration files
MAIN MENU
ALARM
SETUP
SETUP
PROGRAM
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
MON-FRI
SAT-SUN
MONDAY TimeSlot1
00:00
07:30
NIGHT
INFO
S:0.9 6.6
M:0.9 6.4
CFG:6.4
47