Cleansing Brew - Keurig K2.0-500 Serie Guia

SET-UP & CLEANSING BREW
SET-UP
1. Place the brewer on a counter and plug
into a grounded outlet.
3. Rinse the Water Reservoir, fill with
bottled or filtered water, and return it
to the brewer.
2. Lift the Handle, remove and discard the
shipping disk.
4. Press the Power Button and wait
for preheating to complete, about
three minutes.
8

CLEANSING BREW

1. To begin a cleansing brew, place a
12 ounce mug on the Drip Tray.
3. Hold down the Brew Button until
6 ounces of hot water has been
dispensed. The brewer will
automatically stop dispensing after
6 ounces.
SECTION 1
2. Lift and lower the Handle. Do not place
a Keurig brand pack in the Pack Holder.
®
4. You are now ready to use your brewer!
9