Charging The Battery - smartheart 01-509 Manual De Instrucciones

CHARGING THE BATTERY

This device includes an internal rechargeable battery
with DC Wall Adapter.
It is necessary to charge the battery when the unit will not
power up, the low battery symbol appears on the display, when
the display dims or when the display does not illuminate.
Before first use, the device should be fully charged.
Charging time may take up to 90 minutes from depleted
battery.
Never attempt a measurement while the monitor is
charging or connected to a wall outlet.
1. The switch at the top of the device must be in the
ON position to charge; it will not charge if not in
the ON position.
2. Connect the DC cable to the arm monitor and plug
into a standard power outlet.
3. When initially connected, the display will
illuminate; after several seconds the display
will dim but the battery icon will remain. While
charging the battery symbol will flash to indicate
the current charge level.
4. When the device is fully charged, the battery
symbol will stop flashing and remain solid on the
display as long as the power cable is plugged in.
12 • ENGLISH
The 'Low Battery' symbol
will appear on the lower
right of the display.