Important Safety Instructions - La-Z-Boy Reclina-Way Instrucciones De Operación

Important Safety Instructions:

Important: Read these instructions thoroughly before using.
DANGER
– To reduce the risk of serious injury or death:
• To prevent suffocation keep plastic bags away from children.
• Do not sit or lie on mattress of sleep sofa except when it is fully extended. Never close unit with
person or animal inside.
WARNING
– To reduce the risk of burns, fire or serious injury:
• Keep upholstery away from flames or lit cigarettes. Upholstery may burn rapidly, with toxic gas
and thick smoke. Fires that begin elsewhere in a home may spread and involve upholstery.
For your safety, always use a properly installed smoke detector with working batteries.
• Closely supervise children and disabled persons using this product.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit.
Move the unit into or out of the reclining position slowly, making sure that no children or pets are
in close proximity.
• This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers
and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries,
keep children and pets away from openings and moving parts in and around furniture.
• Only the occupant should operate the unit. Never attempt to open the legrest by pulling on it.
• Do not stand, sit, or place extra weight on the arms, back or open legrest.
• To safely exit the unit and prevent a tripping hazard, bring the back upright and close the legrest.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• This product is intended for indoor residential use only.
• Provide a clear path for operation of the back and legrest. Place tables and area rugs at a distance to
allow the legrest to fully extend without rubbing or interference.
• This product is not intended for use as a health care device.
• Do not operate the unit until the back is installed and locked.
• Use care when moving the product. Before lifting the product, secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, reclining
back, or swivel base. Disconnect modular units. Securely grip non-moving parts only.
• Do not sit or place extra weight on the head area of the sleep sofa mattress. Excess weight can cause
the sleep surface to tip up and back.
• This unit is equipped with a tension adjustment feature for the reclining mechanism that is preset at
the factory. The tension setting can be changed for your personal preference. To avoid tip over and
insure stability, do not operate the unit with the tension adjustment wing nuts completely loosened
(See Reclining Tension Adjustment Instructions).
Save These Instructions
4
Important Safety Instructions:
Important: Read these instructions thoroughly before using
• Keep hands, arms and body parts away from the open area between a reclined back and an upright
back on a motion sofa or modular. This area must remain clear at all times to provide unobstructed
movement and prevent injury that could occur when a reclined back is returning toward
the upright position.
• Use of this product requires adequate strength to bring the back upright and close the legrest.
Selecting the maximum tension settings could make bringing the back upright and closing the
legrest difficult.
• Do not use La-Z-Boy ® furniture in a recreational vehicle (or other moving vehicle) while the vehicle
is in motion. This furniture is not intended to protect its occupant in an accident. Safely secure the
furniture while the vehicle is in motion to prevent injury or damages from any sudden stop.
• If you give this product to someone else, include this Operating Instructions manual.
NOTICE
– To reduce the risk of product damage:
• Damage will occur to the mechanism if the legrest is forced closed from the 1st or 2nd
position. The legrest must be extended to the 3rd position and then closed.
• Do not move the units while connected together. The purpose of the bracket system is to
connect the units and prevent them from being separated while on the floor. The bracket
system does not provide adequate structural support for the movement of connected units.
Save These Instructions
5