Quickstart - NuWave Brio 4.5Q El Manual Del Propietario

QUICKSTART

COOK
TEMP
COOK
TIME
600 900 1500
ON/OFF
Press ON/OFF. This button also stops any cooking function. While cooking,
press ON/OFF to cancel and turn off the Brio.
START/PAUSE
Select a cooking function, press START/PAUSE to begin cooking. Press
START/PAUSE to pause cooking and again to resume.
WARM
Use WARM to keep your food warm for an extended period of time after
cooking. You can use WARM independently by pressing and holding down
WARM for 2 seconds. Default is 140°F for 1 hour.
PREHEAT
Press PREHEAT. The temp and time is adjustable using - or +. To begin,
press START/PAUSE. Once it has reached the set temperature the Brio will
beep and a 5-minute countdown will begin. Place your food into the Brio.
The Brio will begin automatically when closed.
SEAR
Sear your food before and after the initial cooking process to preserve juices.
Default is 400°F for 5 min.
PROBE
Plug the Probe into Brio unit (Jack). Press PROBE and set Probe target
internal temperature for food using the - or +. Insert the other end of the
Probe into your food. Press START/PAUSE to begin cooking.
PROGRAM
Press PROGRAM and press - or + to choose preset items (1-100) to cook.
Press - or + when in each cooking function to adjust temps and times. Press
START/PAUSE to begin the chosen program.
sear1 2 temp time prog open
pre ready probe delay stage
+
--
WATTS SEAR
PRE
PROBE
HEAT
ON
warm
OFF
START
PAUSE
PROG WARM
DELAY STAGE
nuwavenow.com nuwavenow.com
11 11