NuWave Brio 15.5Q El Manual Del Propietario página 12

INSTRUCTIONS
4. Press START/PAUSE to
begin cooking.
5. Once Sear 1 is complete,
the Brio will beep once and
automatically go into regular
stage cooking.
• When the Brio is finished
cooking your food, "End"
will be displayed and the
Brio will beep three times.
SEAR 1 2
Sear 1 2 is used to sear before
and after regular stage cooking.
425F
1800
1. Press ON/OFF. Adjust
your cooking temperature
and time for regular stage
cooking.
2. Press SEAR twice. Press
START/PAUSE. The Brio will
sear at 425F (218C) for 5
min (sear 1), go into regular
stage cooking, and then sear
again at 425F (218C) for 5
min. (sear 2).
3. To set a different
temperature and time for
Sear 1 and 2, press SEAR
once and adjust the Sear 1
temperature and time. Press
SEAR again. Adjust the
Sear 2 temperature and
time.
4. Press START/PAUSE to
begin cooking.
22 22
instructions
• Once the Sear 1 cycle
is complete, the Brio
will beep once and
automatically go into
regular stage cooking.
• Once the stage cooking
cycle is complete, the
Brio will beep once and
automatically go into
Sear 2 cooking.
5. When the Brio has finished
cooking your food, "End" will
be displayed and the Brio
will beep three times.
Example Sear your food at
425F (218C) for 3 min. (Sear 1),
cook it at 350F (177C) (default)
for 15 min. (default), and then
sear it again at 380F (193C) for
5 min. (Sear 2): Press ON/OFF.
The default setting for the regular
cooking temperature and time
will be displayed. Press SEAR
once. "425F" ("218C") (default)
will be displayed. Press TIME.
Press the Up or Down arrows to
adjust the searing time to 00:03.
Press SEAR again. Press the
Up or Down arrows to adjust the
searing temperature to 380F
(193C). Press TIME. The "00:05"
default time will be displayed.
Press START/PAUSE.
SEAR 2
The default 2 temperature and
time are 425F (218C) and 5
minutes (00:05).
425F
1800
1. Press ON/OFF. Adjust
cooking temperature and time
for regular (stage 1) cooking.
2. Press SEAR three times.
• 425F (218C) is the
maximum searing
temperature.
• Press TIME. Adjust the
sear 2 (searing) time up to
5 min. (00:05).
3. Press START/PAUSE to
begin cooking.
• Once regular stage
cooking cycle is complete,
the Brio will beep once
and automatically go into
Sear 2 cooking.
• When the Brio is finished
cooking your food, End
will be displayed and the
Brio will beep three times.
Using SEAR as Independent
Function
1. Press SEAR and hold for 1
second.
• The Brio will begin to
sear at 425F (218C) for 5
minutes.
• Temperatures and Times
can be adjusted at any
time.
2. SEAR will flash.
3. Once the SEAR time end the
Brio will display "End".
WARM
Warm can be used as an
independent function to heat
up your food. Default is 140F
(60C) for 1 hour.
:
0 1 00
1800
Press and hold down WARM
for 1 second. The Brio will
automatically begin the WARM
function.
• When the warming time is
over, "End" will be displayed
and the Brio will beep three
times.
• To adjust the time or
temperature, press either
TIME or TEMP and the Up or
Down arrows.
Using Warm After Cooking
Ends to Keep Your Food Warm
1. Press and hold WARM for
1 second. Press the Up or
Down arrows to adjust the
warming temperature.
2. Press TIME. Press the Up
or Down arrows to adjust
the warming time.
3. Press START/PAUSE to
start cooking. The Brio
will cook the regular stage
cooking cycle then will
go into Warm at the set
temperature and time.
Notes:
• The Warm temperature can
be adjusted up to 200F (93C).
nuwavenow.com nuwavenow.com
23 23