Foppapedretti MYO Manual De Instrucciones página 30

GB
USING THE TRAVEL SYSTEM ACCESSORIES
Press the metal pin on the back of the carry cot downwards to secure it to the fastening device on
the handlebar frame (fig.82,83).
WARNING: Before use, always make sure that the accessory has been secured correctly. When the
accessory is lifted upwards it must not detach from the pushchair chassis.
REMOVING THE CARRY COT (fig. 84-87)
Following the direction shown in the figure, pull first the right-hand lever "A" then press button
"B" to release the metal pin, finally pull lever "C" and remove the carry cot, lifting it using the
carry handle.
FOLDING THE PUSHCHAIR WITH ADAPTER ATTACHED (fig. 88-92)
Removing the car seat/carry cot
Pull both the metal clips of the adapter outwards and fold them towards the back of the pushchair
chassis (handlebar end).
Lift lever "A" and keeping it raised, fold the handlebar back, see (fig. 90)
Lift the folding lever on the pushchair chassis "A" and fold down the chassis towards the front. A
click will show that the pushchair has been folded correctly (fig. 91,92).
MYO 30