Setting Seal Time; Full Vacuum Operation - Weston Pro-3500 Instrucciones

SETTING SEAL TIME

The Seal Time button allows you to set Seal Time for all vacuum functions
(Full Vacuum, customized Vacuum Time & Pulse). The seal time will
maintain your selected setting even if you switch from one vacuum
function to another.
1.
With the machine powered on, press the Seal Time button. The button will
illuminate (if you do not adjust the time within 3 seconds, the light will turn off)
2. Use +/- to adjust the number of seconds the seal bar will engage. The
default, recommended seal time is 3 seconds. Follow guidelines for testing your
bag seal (page 10) to determine optimal seal time for your current vacuum
sealing project.
FOLLOW THESE STEPS FIRST FOR ALL VACUUM OPERATIONS:
1. Ensure that the unit is plugged in & turned on. 2. Place items into a vacuum bag.
3. Allow at least 2" (5 cm) at the open end of the bag. Do not cover the vacuum ports.
4. Close the lid and check that the bag opening is in the center of the Vacuum Chamber.
You are now ready to use Full Vacuum, custom Vacuum Time and Pulse operations.

FULL VACUUM OPERATION

1. Press the Full Vacuum button. The button will illuminate.
2. Apply light pressure to the lid. Press the Start button. The pump will
begin removing air while the LED Vacuum Time Monitor begins to count up.
The monitor will count up starting at 00 until the air is completely removed
from the bag.
3. The bag sealing process will now automatically begin. The LED Seal
Time Monitor will begin to count down either from the default recommended
time of 3 seconds, or the Seal Time that you set.
4. Once the Seal Monitor has reached 0, the sealer will automatically stop
the pump and release vac pressure.
270mm x 80mm Permanent Plastic Label
Do not attempt to pull the lid open before the vacuum has been released. Always wait at
least 30 seconds before sealing another bag to avoid overheating. Leave lid open to allow
12
seal bar to cool more quickly.
270mm x 80mm Permanent Plastic Label
Seal Time
Adjustment
Full
Vacuum
Vacuum Time
Seal Time
(counts up)
(counts down)
Seal
Monitor
Start