Van Gerven Eco Switch Manual De Instrucciones página 6

Setting/changing the clock (tSET)
Drawing 5
Pressing the button 1x 3 seconds will take you to the main menu, where first 'PSET' will appear on the display. Then briefly press the button
again once, after which 'tSET' will appear. You enter the clock menu by holding down the button for 3 seconds once again. In this menu, it is
possible to modify the hours of the day in steps of one hour by briefly pressing the button. Press the button for 3 seconds as soon as you have
reached the correct hour. You will then be able to adjust the minutes. The minutes will increase by 1 minute each time the button is briefly
pressed. If the button is pressed for a longer period of time, the minutes will start running faster. Release the button as soon as the correct time
is shown on the display. The correct time will be set and stored 10 seconds after the pushbutton is released.
ATTENTION:
The clock only operates in 24-hour format.
Please note that the clock must be reset after there has been a power cut. You should therefore always ensure that the device is supplied with
electricity whenever it is in use.
Never use an additional timer.
After a power cut the operating hours on the timer (normal operating status) and 00:00 will blink on the display. The clock (tSet) needs to be
reset. The set dosing values are stored permanently in the memory, however. If the clock is not reset, the timer will automatically continue to
count from 00:00 hours, and the device will still carry out dosing at the set times. Check the device regularly for any power cuts that may have
occurred.
Technical specifications of the Eco Switch
• Weight:
• Dimensions l x w x h:
• Maximum wattage:
• Voltage:
• Frequency:
Terms of guarantee
You have made an excellent choice in selecting this product. The device has been assembled carefully and in compliance with all applicable
safety regulations. For reasons of quality, the supplier has only made use of high-quality materials, and provides a guarantee for the device
covering material and manufacturing faults for a period of 2 years from the date of purchase. Claims under the guarantee can only be considered
if the product is returned post-paid together with a valid purchase receipt. Repairs under the guarantee may only be carried out by the supplier.
Guarantee claims that are caused by errors in the installation or in the operation of the device will not be considered. Defects originating from
poor maintenance are also excluded from the guarantee. The supplier will in no way whatsoever be held responsible for any damage caused by
the incorrect operation of the product. The supplier will not be liable for any consequential damage caused by the breakdown of the device.
Complaints regarding transportation damage will only be considered if the damage was established or confirmed upon delivery by the carrier
or the postal authorities. A claim can only be made against the carrier or postal authorities if this has been done.
6
1,100 grams
26x15x7 cm
5/400 Watt
110/230V
50/60 Hz c/s.