Mestra R-080517 Manual De Instrucciones página 7

MODIFYING THE PROGRAMS
• The electronic controls can store in memory
four programs. To store a program, use the
/ / keys as in the previous section.
• After setting the data you want to store, press
the P key as many times as required to select
the P1, P2, P3 or P4 program.
• Then, press the P key again for 3 seconds.
The data will be stored in memory.
USING THE PROGRAMS
• To use the data stored in any of the four
programs, press the P key as many times as
d d
required to select the P1, P2, P3 or P4
program.
• The data stored in the program will show
directly on the displays until you press the
START/STOP
MAINTENANCE AND CLEANING
For best reliability and a long service life, we
recommend the following:
Clean the mixing bowl carefully each time it
•
is used. This will prevent dirt building up and
seizure of the blade shaft. Make sure the
bowl seat and joint are cleaned for a
complete sealing.
Keep the unit and the surroundings clean.
•
Do not use
inflammable products.
The filter inside the bowl connection (F) must
•
be replaced periodically. Unscrew the filter-
silencer and replace it with a new one. You
can use a 10 mm box spanner.
We recommend
•
MESTRA spare parts for mixer maintenance.
PRECAUTIONARY MEASURES
♦ Before connecting up the unit, check the
power supply is 230 V, 50/60 Hz with
earthing.
♦ Do not fit the bowl to the unit when the mixer
motor is on. Make sure the blades-bowl set
is properly assembled.
Distribuidor: DepoDent España
key.
solvents or any
using always original
depósito dental DepoDent España - 902 767 118 -
♦ Do not let children or unqualified staff handle
the unit.
♦ Choose a solid well-leveled wall to place the
mixer, and make sure that fixing bolts are
firmly screwed into the wall.
♦ Wait for the motor to stop completely after
finishing a cycle before removing the bowl.
♦ Disconnect the unit from the power supply
during cleaning operations.
TECHNICAL CHARACTERISTICS
Height:
Width:
Depth:
Weight:
Supply voltage:
Power:
RPM:
Timer:
other
English
350 mm
155 mm
205 mm
4,8 kg
230 V, 50/60 Hz
100 W
100 ~ 400 rpm
0 ~ 300 "
ventas@depodent.es
7