EAS ELECTRIC EMWI8240 Manual De Usuario página 28

Operate Washing Machine
- Delicate (delicado)
You can select this procedure to wash your delicate clothes. Its washing intension is gentler and
revolution speed is less compared with the procedure "Synthetic". It is recommended for the articles
to be washed softly.
- Drain Only (desagüe)
Separate Drain only Procedure.
- Spin Only (centrifugado)
Separate spin only procedure. Soap water or rinse water shall be drained out before spinning.
- Rinse&Spin (aclarado y centrifugado)
Separate Rinse&Spin Procedure.
My Cycle (mi ciclo)
-
Press Speed 3sec. for my cycle to memory the procedure. The default my cycle is cotton intensive.
The main function can be selected as follows:
- Prewash
The Prewash function can get an extra wash before main wash.
- Extra Rinse
The laundry will undergo extra rinse once after you select it.
- Delay
Delay function can be set with this button, the delaying time is 0-24H.
Set the delay function:
1.Select a programme;
2.Press the Delay button to choose the time;
3.Press Start/Pause to commence the Delay operation.
Cancel the Delay function :Press the Delay button until the display will be 0H . It should be
pressed before starting the program. If the program already started, should press the
On/Off button.
Notes: If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and when the power is restarted ,the left time is
continues.
- Child Lock
To avoid that the washing procedure cannot operate normally due to the mis operation by
kids during the washing procedure, you can select this function, In this case, the other
buttons except On/Off button can not work, at this state ,the machine power off when press
the key on/off. The machine remembers the program child lock and the program during
powered off when press the key on/off again.
Press "Temp." and "Speed" together 3 seconds during the running procedure, the buzzer
will beep ,Start/Pause button as well as the rotary switch are locked. Press the two buttons
for 3 seconds together and buzzer will beep to release to locking. But cut off the power
supply , the kid's protection is also release to locking. The kid's protection will not be
cancelled after all procedures are completed.
P.20
Operate Washing Machine
- Suppression of the acoustic signals
This is an additional buzzer function on your appliance. After deactivating the buzzer function,
the buzzer will be closed.
After starting the machine, press the "Temp." button for 3 seconds and you will hear a beep,
then the buzzer will be closed. To restart the buzzer function, press the "Temp."button
again for 3 seconds. The setting will be kept until the next reset.
Warning: After deactivating the buzzer function, the sounds will not be activated any more.
- Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there is excessive detergent,
which will affect wash and rinse effects. The procedure will check automatically and one
bubble removal procedure will be added automatically to remove bubbles when excessive
bubbles are checked.
V.1 P.21
V.1