Network Connection - Dacor DYF42SBI Serie Manual Del Usuario

Using the Refrigerator

09 Network connection

You can control and monitor your refrigerator through the SmartThings app. For more
information, see the SmartThings section.
NOTE
• Recommended encryption systems include WPA/TKIP and WPA2/AES. Any newer or
unstandardized Wi-Fi authentication protocols are not supported.
• Wireless networks may be affected by the surrounding wireless communication
environment.
• If your Internet service provider has registered the MAC address of your PC or modem
for identification, your Dacor Smart Refrigerator may fail to connect to the Internet. If
this happens, contact your Internet service provider for technical assistance.
• The firewall settings of your network system may prevent your Dacor Smart
Refrigerator from accessing the Internet. Contact your Internet service provider for
technical assistance. If this symptom continues, contact a local Dacor service center or
retailer.
• To configure the wireless access point (AP) settings, see the user manual of the AP.
• Dacor Smart Refrigerators support both Wi-Fi 2.4 GHz with IEEE 802.11 b/g/n and
Soft-AP protocols (IEEE 802.11 n is recommended).
• Unauthorized Wi-Fi wireless routers may fail to connect to applicable Dacor Smart
Refrigerators.
10 Shabbat Mode
The Shabbat mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate, press and hold Energy Saver and Lighting simultaneously for 5 seconds
to enter Shabbat mode. Then the refrigerator operates in Sabbath mode where the
buttons, the display, and the room lamps are all under control.
• To deactivate, press and hold the buttons again for 5 seconds to exit Shabbat mode.
NOTE
Even after the refrigerator powers off and restarts, the Shabbat mode remains active. To
exit, you must deactivate it first.
26 English
TBI_Dacor_UserManual_DA68-03581A-04_EN.indd 26 2020-12-11 5:12:44