Publicidad
Idiomas disponibles
Idiomas disponibles
1.1.1 Electrical safety
B
DANGER!
•
Electrical safety instructions should be
followed while electrical connection is made
during the installation.
•
The appliance must not be supplied
through an external switching device, such
as a timer,or connected to a circuit that is
regularly switched on and off by utility.
• Connect the dryer to a grounded
outlet protected by a fuse at the
value specified on the type label.
Have the grounding installation
performed by a qualified electrician.
Our company shall not be liable for
any damages that will arise when
the dryer is used without grounding
in accordance with the local
regulations.
• The voltage and allowed fuse
protection is stated on the type label
plate.
• The voltage specified on the type
label must be equal to your mains
voltage.
• Unplug the dryer when it is not in
use.
• Unplug the dryer from the mains
during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet
hands! Never unplug by pulling
on the cable, always pull out by
grabbing the plug.
4
B
DANGER!
• Do not use extension cords, multi-
plugs or adaptors to connect the
dryer to power supply in order to
decrease the risk of fire and electric
shock.
• Power cable plug must be easily
accessible after installation.
•
Damaged mains cable should be changed
notifying the Authorized Service.
•
If the dryer is faulty, it must not be operated
unless it is repaired by an authorized
service agent! There is the risk of electric
shock!
1.1.2 Product safety
DANGER!
• Superheating of the clothes inside
of the dryer can occur if you cancel
the programme or in the event of
a power failure whilst the dryer is
running, this concentration of heat
can cause self-combustion and fire
so always activate the ventilation
programme to cool down or quickly
remove all laundry from the dryer in
order to hang them up and dissipate
the heat.
Dryer / User Manual
Publicidad
