Tabla De Contenido; Safety First - RedMax BCZ350S Manual De Instrucciones

BCZ350S

SAFETY FIRST

Instructions contained in warnings within
this manual marked with a
concern critical points which must be
taken into consideration to prevent
possible serious bodily injury, and for this
reason you are requested to read all such
instructions carefully and follow them
without fail.
■ WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions which must
be followed in order to prevent accidents
which could lead to serious bodily injury or
death.
IMPORTANT
This mark indicates instructions which must
be followed, or it leads to mechanical failure,
breakdown, or damage.
This mark indicates hints or directions useful
in the use of the product.
Contents
US-2
symbol
NOTE
WARNING
1. Read this brushcutter Owner/Operator
Manual carefully. Be sure you
understand how to operate this unit
properly before you use it. Failure to do
so could result in serious injury.
2. Be sure to keep this manual handy so
that you may refer to it later whenever
any questions arise. Also note that you
are requested to contact the dealer from
whom you purchased the product for
assistance the event that you have any
questions which cannot be answered
herein.
3. Always be sure to include this manual
when selling, lending, or otherwise
transferring the ownership of this
product.
4. Do not lend or rent your machine
without the owner's manual.
5. Be sure that anyone using your unit
understands the infomation contained in
this manual.
6. Never allow children to use or be in the
vicinity of the machine. As the machine
is equipped with a springloaded stop
switch and can be started by low speed
and force on the starter handle, even
small children under some
circumstances can produce the force
necessary to start the machine. This can
mean a risk of serious personal injury.
Therefore remove the spark plug cap
when the machine is not under close
supervision.
1. Parts location......................................................................3
2. Key to symbols ...................................................................4
3. For safe operation ..............................................................5
4. Set up ...............................................................................13
5. Fuel...................................................................................16
6. Starting and stopping........................................................18
7. Working techniques ..........................................................20
8. Maintenance .....................................................................23
9. Technical data ..................................................................27