Use The Spray Gun; Change The Nozzle; Nozzle Type - GreenWorks GPW2000-1RBSC Manual Del Operador

4. Install and tighten the end of the garden hose (18) to the
water inlet connector (8).
CAUTION
There must be a minimum of 10 ft of free hose between the
water inlet and the water supply.
4.2

USE THE SPRAY GUN

4
20
WARNING
For safe control, keep your hands on the gun at all times.
• Pull and hold the spray gun trigger (19) to start the
machine.
• Release the spray gun trigger (19) to stop water flow
through the nozzle (11).
4.2.1 UNLOCK THE SPRAY GUN TRIGGER
• Push backward the trigger safety button (20).
4.2.2 LOCK THE SPRAY GUN TRIGGER
• Push forward the trigger safety button (20).
English
4.3
2
19
Before you change the nozzle:
1. Pull the gun trigger to release water pressure.
2. Lock the trigger safety button on the gun.
3. Stop the mahcine.
Do not point the spray wand at your face or others'.
4.3.1
9

CHANGE THE NOZZLE

11
21
WARNING
WARNING

NOZZLE TYPE

SPRAY TIP APPLICATION
Green - Narrow fan tip (25° )
• The green pressure washer tip pro-
vides high versatility with its 25 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
O
25
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
White - Wide fan tip (40° )
• The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
O
40
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
EN