Making The Electrical Connection - Home Decorators Collection 51549 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Making the electrical connection

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
Connect the fan motor white wire to the receiver white wire
using a wire connecting nut (BB).
□
Connect the fan motor black wire to the receiver black wire
using a wire connecting nut (BB).
□
Connect the fan motor blue wire to the receiver blue wire
using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (GG).
Receiver (F)
Receiver
Antenna
ON DIP
1 2 3 4
Blue
BB (x3)
Outlet box
in the ceiling
(GG)
Green
Black White
7
Mounting the fan-motor assembly
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Align the locking slots of the fan-motor assembly (B) with the
two screws (CC) in the slide-on mounting bracket (A). Push up
to engage the slots, and turn clockwise to lock the fan-motor
assembly (B) in place.
□
Firmly tighten the two mounting screws (CC).
□
Install the two mounting screws (saved from Assembly Step
1 "Preparing for mounting") into the holes in the fan-motor
assembly (B) and tighten firmly.
□
Install the decorative canopy ring (EE) by aligning the ring's
slots with the screws in the fan-motor assembly (B). Rotate
the canopy ring (EE) counterclockwise to lock it in place.
A
10
CC
EE
B