Installing The Receiver - Home Decorators Collection 51549 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
4

Installing the receiver

WARNING: To reduce the risk of fire or electric shock,
remember to disconnect power. The electrical wiring must
meet all local and national electrical code requirements.
The electrical source and fan must be 110/120 volt, 60Hz.
Do not use this product in conjunction with any variable wall
control. Incorrect wire connection can damage this receiver.
CAUTION: If other fan wires are a different color, have this
unit installed by a licensed electrician.
CAUTION: Do not install the receiver in a damp location or
immerse in water (For indoor use only). Do not pull on or cut
the receiver leads shorter. Do not drop or bump the unit.
□
Position the house supply wires (AAA) to one side of the
slide-on mounting bracket (A); position the fan wires (BBB)
to the opposite side.
□
Insert the narrow end of the receiver (F) (as shown, flat side
towards the ceiling) into the slide-on mounting bracket until
it rests on top of the ball/downrod assembly.
A
AAA
5
F
BBB
9
Wiring the receiver to the household
wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (BB).
□
Connect the receiver black (or red) wire to the household
black (hot) wire using a wire connecting nut (BB).
□
Connect the receiver (F) white wire to the household white
wire (neutral) wire using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
Black
Black
(or Red)
Receiver
Antenna
ON DIP
1 2 3 4
Receiver (F)
Please contact 1-800-986-3460 for further assistance.
Outlet Box
in the ceiling
(GG)
Green (or Bare)
BB (x3)
White
Green
White
HOMEDEPOT.COM/HOMEDECORATORS