Neumann Mission Guia De Instalacion página 5

Trees
If there are roots emerging from the ground, these areas
should be avoided in order not to damage the roots.
Depressions and bumps
In the case of large bumps or dips, please consider if the
blades could touch the ground; if this is the case, either
make the inclines smoother or exclude those areas from your
Mission 's operation.
®
35% (20°)
Slopes
Your Mission has the ability to safely climb slopes up to 35%
®
(20°), so just avoid anything steeper than this.
Placement of Boundary Wire on slopes
The Upper Boundary Wire should NOT be placed on slopes steeper
than 35% (20°). The Upper Boundary Wire should have a distance
of at least 45cm between any obstacles. The Lower Boundary Wire
should NOT be placed on slopes steeper than 25% (15°). The Lower
Boundary Wire should have a distance of at least 55cm between any
obstacles when it is positioned on a slope that is 25%.
5
EN