Quick Installation; Optional Installation - Tripp-Lite TE Serie El Manual Del Propietario

Quick Installation

Plug your UPS into an
1
electrical outlet.
Plug your computer, monitor
2
and external modem into your
UPS's battery-supported
outlets.
*Your UPS is designed to support only computer equipment.
You will overload your UPS if you connect devices with high
power draws (such as some household appliances, laser
printers and surge suppressors) to battery-supported outlets.If
your UPS is equipped with "Surge Only" outlets (which would
be labelled as such on the back of your UPS), you may connect
these devices to the "Surge Only" outlets. Equipment connected
to "Surge Only" outlets will not receive battery power in the
event of a power outage.
Set your UPS's "OFF – ON"
3
**
Switch.
USA, Canada & Western Europe
• Set it and leave it "ON" at all times.
All Other Countries
• Set to "OFF" when you are not using connected
equipment.
(WARNING! When set to "OFF," UPS will not provide battery
backup during a blackout or brownout)
• Set to "ON" when you are using connected
equipment.
**See Basic Operation section for the Switch Function, UPS
Conditions and Setting Advantages.

Optional Installation

Computer Connection
If your UPS features a DB9 port, it may be connected
to a computer for use with UPS monitoring software.
Using a serial cable (user supplied), connect the DB9
port of your computer to the DB9 port of your UPS.
Download FREE PowerAlert software from
www.tripplite.com and run the installation program
appropriate to your computer's operating system.
†Phone line and DB9 port connections are optional. Your UPS
will function properly without these connections.
†
3