FM RADIO
Frequency range: 87.5 - 108 MHz
This device has a built-in FM radio. Up to 20 radio stations can be stored.
When you use the unit for the first time, press the POWER button to put
the unit into standby mode. Press the ON/OFF button on the control panel
or the POWER button on the remote control to turn it on. The unit starts
operating in FM mode. FM 87.5 MHz" is displayed on the screen and a
hissing sound is heard from the speakers (unless there is a radio station on
the 87.5 MHz frequency in your area). If the unit does not start in FM mode,
press the MODE button on the unit or the FUNCTION button on the remote
control repeatedly until the FM mode is displayed on the screen.
Automatic station search and saving of found stations
Press the AUTO button to start the automatic station search from frequency
87.5 MHz upwards. The first 20 stations found are automatically stored
(designation P01 - P20). Press the PR- or PR+ buttons to view all stored
stations in sequence.
Automatic station search without saving the found stations
Press and hold the
reception with falling or rising frequency. This automatic search function
does not save the found stations. The search will not continue after a
station is found.
Note: If you press the
range will be adjusted in 0.05 MHz steps.
Note: when programming to store radio stations, local radio programs
must have a strong signal of 20 stations or more in order to store to 20
stations.Otherwise, only the number of stations that can be received can
be stored.
/
button to search for a station with good signal
/
buttons briefly several times, the frequency
EN
35