Bt Mode - auna Graceland Touch Manual Del Usuario

EN
38

BT MODE

1. Press the MODE button repeatedly until the screen displays „BT" and
wait 3 seconds until the device can be found by other BT devices in the
device list
2. Turn on your BT-enabled mobile device and search for available BT
devices in the device list.
3. Select „JUKEBOX" from the device list.
4. Once the devices are successfully paired, the screen will display
„connected". You can now play the songs on your mobile device. You
can operate them from your mobile device, from your device itself or
from the remote control of the device.
a) Playback from the device: Use the VOL+/VOL-,
buttons to adjust the volume, pause or resume playback, or select
the previous or next song.
b) You can also control playback from the unit's remote control.
c) Once the devices are paired, the mobile BT device will automatically
start playing music.
d) Press VOL+/VOL- buttons to adjust the volume.
e) Press the /
f) Press the button to resume playback.
g) Press MODE button to end pairing and select another mode or
disable the BT function on your mobile device.
Tips for the BT connection
1. If you want to pair your device with a BT mobile device, place the
devices as close as possible to each other for connection.
2. The BT connection may not work properly for the reasons listed below:
• There is an obstacle between the jukebox and the BT device.
• Another device, such as medical equipment, microwaves or other
WLAN devices, is using the same frequency as the BT device.
• Only one mobile BT device can be connected to the jukebox at a
time. A multiple coupling is not possible.
buttons to move to the previous or next song.
and /