Cooke & Lewis CLIND60E Manual Del Usuario página 20

Installation Installation
A B
All installation must be carried out by a competent person or qualified electrician. Before connecting the
A
mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.
Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum
opening of 3 mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the
wiring diagram.
The cable must not be bent or compressed.
Regularly check the power cord for damage.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 5 core mains cable coloured as follows:
Brown and Black = L or Live
Blue and Grey = N or Neutral
Green and Yellow = E or Earth
N (Blue/Grey)
L (Brown/Black)
(Green/Yellow)
This appliance requires a 32 Amp Miniature Circuit Breaker.
To avoid the risks that are always present when you use an electrical appliance it is important that this
appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and
hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After
unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance but contact
Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or
improper installation of the appliance. Any permanent electrical installation must comply with the latest wiring
regulations applicable to your country and for your own safety a qualified electrician or contractor should
undertake the electrical installation.
Montaż Instalare
C E
Instalación
F
L
N
220-240V~