Cooke & Lewis CLIND60E Manual Del Usuario página 31

Trouble Shooting
A
Trouble shooting
Error
No pot or pot not suitable
ER03 Water or pot on the glass over the control
The connection between the display board and the left mainboard
F1E
is fail. (The cooking zone which indicator showing "E")
Coil temperature sensor failure. (The cooking zone which indicator
F3E
showing "E")
Mainboard temperature sensor failure. (The cooking zone which
F4E
indicator showing "E")
E1E Temperature sensor of the ceramic glass plate is high
E2E Temperature sensor of the IGBT is high
E3E Abnormal supply voltage (too high)
E4E Abnormal supply voltage (too low)
Temperature sensor failure (the cooking zone which indicator
E5E
showing "E")
This appliance respects laws of the suppression of radio interference. As the Manufacturer has a policy of continuous
product improvement, it reserves the right to adapt and carry out any modification considered necessary without prior
warning.
Possible cause What to do
Choose the suitable pan
Clean the user interface
Repair is required. Telephone
the customer service number to
book an engineer visit.
Please restart after the induction hob
cools down.
Repair is required. Telephone
the customer service number to
book an engineer visit.