How To Assemble Your Light Kit - Fanimation NAVY LP7678LBN Manual Del Usuario

How to Assemble Your Ceiling Fan Blades (Continued)
2. Secure the blade holders to the bottom of the motor
assembly using the 1/4˝-20 screws from the hardware
bag. (Figure 2)
NOTE: Periodically check blade holder hardware and
resecure if necessary.
WARNING
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between the rotating blades.

How to Assemble Your Light Kit

CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
2. Assemble the light shade assembly to the adaptor
plate of the motor assembly using the two key slots
in the light shade assembly. Replace the third screw
and secure all three screws. (Figure 2)
Motor
Assembly
HARDWARE USED:
1/4"-20
Screws
Motor
Assembly
12
Blade Holder
1/4"-20 Screws
(2 per assembly)
Figure 2
X 6
Figure 1
Light Shade
Assembly
Figure 2