Commissioning; Before Using The Appliance For The First Time; Filling The Water Tank - Be Cool BC9ACHL2001F Manual De Instrucciones

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Unpacking the Appliance
1. Open the carton and take out the appliance.
2. Remove all packaging from the appliance.
3. Unwind the mains cable completely and make sure not to damage it.
Transport wheels
For easier transport, the appliance is equipped with transport wheels.
In addition, two rollers are equipped with a locking brake to guarantee that they remain firmly
in position.
1. After the appliance has been carefully unpacked, insert the transport
rollers into the designated notches on the bottom of the appliance.
INSTALLATION
Please note the following points for installation.
1. Place the appliance on a level and solid surface and adjust the locking brakes so that
the appliance stands firmly in position.
2. There must be at least a 50 cm gap to walls or other objects.
3. Before using the appliance, make sure that both the air inlet and the air outlet are free
of obstacles and are not blocked.
4. Connect the appliance to an earthed outlet.

FILLING THE WATER TANK

Furthermore, please note the following:
1. Pull out the water tank.
2. Fill it with clean water and pay attention to the level on the front
of the water tank until the orange water level indicator reaches
water level scale.
3. Make sure, that the outside of the water tank is dry. If necessary
wipe the watertank.
4. Then carefully push the tank back into the aircooler.
Never fill the water above the limit oft he water level scale, as otherwise water will get
inside the device and could damage electronic parts.

COMMISSIONING

NOTE
Seite 18 von 123