Setting The Functions; Control Panel And Remote Control - Be Cool BC9ACHL2001F Manual De Instrucciones

CONTROL PANEL AND REMOTE CONTROL

The functions of the air cooler can be set using the remote control or directly on the
device on the control panel.
When controlled by remote control, please point it directly at the device so that it
functions properly.
CONTROL PANEL
HEAT-Mode ION-Mode SWING
ON/OFF

Push the ON/OFF –button to turn the aircooler ON and OFF.

As soon as you turn on the device, the respective indicator will light up.
SET THE SPEED

Use the SPEED-BUTTON to set the fan speed.

The respective LED will light up:
Press 1x  Level 1  Low Speed
Press 2x  Level 2  Medium Speed
Press 3x  Level 3  High Speed
SWING-MODE

Use the SWING-Button to switch the oscillation of the device on and off  the
respective LED will light up.

Press the SWING-Button again to switch off the oscillation.
With this function, the blown air is distributed to the left and right. This allows you to achieve
ION-MODE

The Air Cooler has an ionizer-function. To activate or deactivate it, press the ANION-
Button  the respective LED will light up.

SETTING THE FUNCTIONS

COOL-Mode Speed ON/OFF
NOTE
a horizontal air distribution.
Seite 19 von 123
REMOTE CONTROL
ON/OFF
COOL-Mode
ION-Mode
Speed
Swing
HEAT-Mode