Hansgrohe 28411 Serie Manual Del Usuario página 8

1
1.
2
3
8
Installation
Turn the water off at the main.
2.
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛"
outside the surface of the finished wall.
Remove the cover, flush insert, and seal.
Install the filters, seals, and pipe assembly.
Fasten the pipe assembly to the iBox using the
enclosed screws.
Tighten the screws using a 4 mm Allen wrench.
English
Seal the wall around the i-box
with waterproof sealant.
Failure to seal the wall can lead to
possible water damage.