Pre-Use Checks - MSA Latchways GTFA Instrucciones Para El Usuario

that the individual device is compatible with the system (Table
1). If there is no system energy absorption then only devices that
include an energy absorber shall be used.

6 Pre-use checks

Always fully inspect the following:
System tension Ensure the system indicator provided is correct:
Tenser disk (Figure 2) – Only use the system if the Tenser disk
freely rotates.
Visual tension indicator (Figure 3) – This component allows the
User to check the system tension in situations where it is impractical
to reach a tension indicator disc from a position of safety.
Complete the Latchways Vertical GTFA Pre use checks in
accordance with Table 2.
Inspect the system for any faults and evidence that it is within its
service life. Ensure that the device is compatible with the system
and sufficient energy absorption is provided (p83 - Latchways
Vertical fall arrest system label).
If the Latchways Vertical GTFA device is damaged, has
arrested a fall, there is any doubt about the safe condition of
the device or the service date has expired and it is unable to
pass an examination it shall be withdrawn from service. This
shall be recorded on the record card. and the device passed
to a Technician
7 User Instructions
Ensure there is a rescue plan in place to deal with any
emergencies which may arise and you are fully aware of the
procedure before attempting any work at height.
Hold the Latchways Vertical GTFA in the right hand by the release
catch cover below the level of the attachment point so that the
linkage is in the vertical plane. This will force the cam into the
unlocked position. Figure 4.
for disposal or repair.
1
5