Control Panel - DrBrowns AC178-INTL Instrucciones De Uso

PARTS:
A. Lid
B. Tray
C. Removable Handle
D. Lower Rack
E. Base
F. Control Panel
G. Filter Cover
H. HEPA Type Filter
I. Measuring Cup

CONTROL PANEL:

7
TO USE:
1. Before running this appliance, it is important that all bottles, bottle parts and/or
other accessories are clean. They must be washed, rinsed and empty.
2. Position the appliance on a flat surface and out of reach of children where it cannot
be knocked or moved during operation. Remove the lower rack, tray, and lid from
the base.
3. Fill the measuring cup to 110 ml with DISTILLED water and pour the water ONTO
THE STAINLESS STEEL HEATING PLATE in the base.
NOTE: DO NOT EXCEED the recommended amount of water.
NOTE: Tap water and bottle water contain minerals that shorten the life of this
appliance. Damage from use of non-distilled water will void the warranty.
4. Place the lower rack on the base and arrange bottles with the opening facing
down over the posts of the lower rack. Place the bottle accessories (e.g. nipple/teat,
collar, cap, etc.) on the tray.
NOTE: If using Dr. Brown's bottles and parts, see Figure A through Figure H on
page 6 for suggested layout options. Both narrow and wide-neck bottles are shown.
NOTE: Always replace lower rack on base before turning the sterilizer on.
3
D
E
F
Power
Sterilize Only
6
A
C
H
Automatic
Sterilize/Dry
Dry Only
5
B
I
G
4 3