Off-Season Storage - Troy-Bilt FLEX 23AAAA8X711 Manual Del Operador

7. Remove the top belt from the drive spindle by working the
belt around the spindle pulley as shown in Figure 6-10.
Figure 6-10
8. Using the attachment handle, pull up on the mowing deck
attachment to create a larger gap between the drive pulley
and frame, easing removal of the top belt from around the
drive pulley. Refer to Figure 6-11.
Figure 6-11
9.
Spindle Pulley
10.
11.
12.

Off-Season Storage

The following steps should be taken to prepare your lawn mower
for storage.
•
•
•
•
•
When storing any type of power equipment in a poorly
ventilated or metal storage shed, care should be taken to
rust-proof the equipment. Using a light oil or silicone, coat the
equipment, especially cables and all moving parts of your lawn
mower before storage.
Relieve tension on the lower belt by moving the idler arm
and tension pulley inward as shown in Figure 6-12.
Figure 6-12
Remove the lower belt by working it off of the image left
pulley above first, then the other pulley and off of the
machine.
Replace the lower belt, then the upper belt.
Repeat Steps 1 through 9 in the reverse order to complete
the belt replacement process.
Clean and lubricate mower thoroughly as described in the
lubrication instructions.
Do not use a pressure washer or garden hose to clean your
unit.
Coat mower's cutting blade with chassis grease to prevent
rusting.
Refer to Engine Maintenance section in the FLEX™ Base
Unit manual for correct engine storage instructions.
Store mower in a dry, clean area. Do not store next to
corrosive materials, such as fertilizer.
S 6 — S 17
ection ervice