Mounting Of Handle - PAPILLON Duranius Manual De Instrucciones

Cod. 99877 – DURANIUS
machine before you change them if they
are damaged.
1. Safety instructions
SAFETY DEVICES
• The unloader
pressure if it exceeds pre-set values.
Locking device on trigger gun (see
illustration at the beginning of this
manual): The trigger gun features a
locking device.
activated, the trigger gun cannot be
operated.
THERMAL SENSOR
A thermal sensor protects the motor
against overloading. The machine will
restart after a few minutes when the
thermal sensor has cooled.
2. First time instructions
This section will explain in details how
to make high pressure washer ready for
use.

2.1 Mounting of handle

Install the handle
instruction.
valve can reduce
When the knob
as following
The finished handle should be:
is
2.2 Handle installing
Install the
machine as following
3. Operation instructions
3.1 Connection of garden hose
3. Screw the water inlet coupling tight
on to the water inlet Note: The inlet
filter must always be fitted in the
water inlet pipe to filter out sand,
finish handle into the
24