Mounting Of High Pressure Hose; Water Connection - PAPILLON Duranius Manual De Instrucciones

Cod. 99877 – DURANIUS
lime stone and other impurities as
these will damage the pump valves.
Caution: Failure to fit the filter will
invalidate the guarantee.
4. Connect the garden hose with a
standard quick coupling

3.2 Mounting of high pressure hose

2. Attach the high pressure hose to the
trigger gun and machine.
Detach the high
pressing the pawl (A) or button (B)
A
B
pressure hose
3.3 Mounting of lance and nozzle
4. Push the lance into the trigger gun
5. When inserted turn it. Caution: Make
sure the lance is properly fixed to the
gun
6. Attach the nozzles.
Caution: When attaching the nozzle the
button (A) on the nozzle should come
out again. Check before activating the
trigger that the nozzle is properly fixed.
A
3
by

3.4 Water connection

An ordinary 1/2" garden hose of min. 10
m and max. 25 m will be suitable.
IMPORTANT! Only use water without any
impurities. If there is a risk of sand
particles in the inlet water (i.e. from
your own well), an additional filter
should be mounted.
4. Let the water run through the water
hose before connecting it to the
machine to prevent sand and dirt
from penetrating the machine. Note:
2
1
25