Ec Declaration Of Conformity; Product: Ontario - Inflatable Boat - Gumotex ONTARIO Manual De Usuario

GB
EC – Declaration of Conformity
GUMOTEX, akciová společnost
Mládežnická 3A, č. p. 3062
Registered in Commercial Register at
Regional Court in Brno, section B, fi le. 413
PRODUCT: ONTARIO – INFLATABLE BOAT
ONTARIO is a six-person boat with an open stern designed for water sports.
It is used for up to WW 3 (diffi cult) white water grade (intensive rapids, high irregular waves, holes, whirlpools,
medium-sized blocks, low steps in an intensively meandering or unclear river bed).
The paddling persons sit on the seats or side cylinders and propel the boat using long canoe paddles. Persons need
to use life jackets.
It is necessary to observe boating rules.
TYPE OF DRIVE:
Gumotex, a. s. has adopted measures at the level stipulated by EN ISO 9001, by which it assures conformity of all products
launched to the market with the technical documentation and with basic requirements.
The boat ONTARIO is included in design category D - „inland" – vessels designed for voyages on sheltered coastal waters,
small bays, small lakes, rivers and canals when conditions up to, and including, wind force 4 and signifi cant wave heights
up to, and including, 0,3 m may be experienced, with occasional waves of 0,5 m maximum height, for example from passing
vessels.
LIST OF APPLIED DOCUMENTS AND STANDARDS:
94/25/EC European Parliament and Council Directive of 16 June 1994 on the approximation of the laws,
regulations and administrative provisions of the Member States relating to recreational craft
2003/44/EC European Parliament and Council Directive of 16 June 2003, amending Directive 94/25/EC on
the approximation of the laws, regulations and administrative provisions of the Member States
relating to recreational craft
EN ISO 6185-1 Infl atable boats - Part 1: Boats with a maximum motor power rating of 4.5 kW
EN ISO 10087 Small craft - Craft identifi cation - Coding system
EN ISO 10240 Small craft - Owner's manual
EN ISO 14945 Small craft - Builder´s plate
APPENDICES – DOCUMENTATION STORED WITH THE MANUFACTURER:
Technical documentation for assessment of conformity
Substitutes issue dated
Author: Ing. Vlasta Dadejová, technical standardization
Identifi cation data on the person authorized to sign on behalf
of the manufacturer: Ing. Patrik Vančík, general manager
38
MANUFACTURER:
690 75 Břeclav
ID No.: 16355407
canoe paddles
Issued in conformity with European Parliament and Council
Directive 94/25/EC of 16 June 1994 on the approximation
of the laws, regulations and administrative provisions of the
Member States relating to recreational craft and European
Parliament and Council Directive 2003/44/EC of 16 June
2003, amending Directive 94/25/EC on the approximation
of the laws, regulations and administrative provisions of the
Member States relating to recreational craft.
In Břeclav on 15 May 2013
2371
No.: III - 060