User Setting - Gima 32786 Guía De Uso

Applying the Wrist Cuff
1. Place your elbow on a table and palm facing upward, and wrap the arm cuff
around the upper left arm.
2. Pull on the end of the cuff until it wraps securely around your upper wrist. Do not
over tighten the cuff. Allow 1-2 cm or ½ inch between the bottom of the cuff and
your wrist joint.
3. Make sure the cuff is at the same level as your heart.

User Setting

Press "page q" button to switch between User Page 1 and 2. This unit allows a
maximum of 2 users to store measurement records in different User Pages.
Taking Measurement
1. Press the " ". button. The cuff will automatically inflate and the measurement
will start.
2. When the measurement is complete, the cuff will automatically deflate and your
systolic and diastolic pressure values and pulse rate will display.
3. Remove the arm cuff and take note of your measurement results.
Note: You can press the "
ENGLISH
" button to stop measurement at any time.
14