Random Function; Summer Time Function - kobi PC EL Manual Del Usuario

PROGRAMMER SETTING
1) Press the "TIMER" button - "ON" and "1" will be displayed on the left side of the screen - it means that the device
power up time for program number 1 is programmed.
2) Next, using the button: "WEEK" select the days, "HOUR" select the time, "MINUTE" select the minutes to which
the program will be processed (turning on the device plugged into the programmer).
3) Confirm the selected time and day (or days) of the week to start the programmer again by pressing the "TIMER"
button once.
4) After confirming the moment of switching on, the programmer will automatically go to determine the moment of
switching off the programmer ("OFF 1") - according to point 2, set the moment when the device will be turned off.
5) In order to set further programs, go to step 6. In order to finish programming up to this point, press the "CLOCK"
button - it will confirm the moment of switching off ("OFF 1") and the programmer will display the current time
(program number 1 is already set).
6) To program another program, press the "TIMER" button again - it will confirm the moment of turning off ("OFF 1")
and the programmer will go to the programming section of the second program ("ON 2").
7) Similarly to steps 2 - 5, you can set the time for subsequent programs, up to a total of 8 at once.
8) In order to deactivate a given program, for example the second one, go to its switching option ("ON 2") using the
"TIMER" button. When the display shows the switching option for the example program 2 ("ON 2"), press the "RES /
RCL" button, which will turn the program off displaying the "--:--" signs. Each disabled program is in the device's
memory, so if you need to restore it, just go back to "ON 2" and press the "RES / RCL" button again.
9) According to point 5, each time to exit the programming section, simply press the "CLOCK" button.

RANDOM FUNCTION

1) Make sure that the device is in "AUTO" mode. Then press the "RANDOM" button.
2) "RANDOM" appears on the display. From now on between 6:00 AM - 6:00 PM, from time to time the device will
turn on for 0 to 32 minutes.
3) To deactivate this function, simply press the "RANDOM" button again.

SUMMER TIME FUNCTION

1) Make sure that the device is in "AUTO" mode. Then press the "CLOCK" and "ON/AUTO/OFF" buttons
simultaneously.
2) The time should change by an hour forward and the display will show "SUMMER".
3) To go back to winter time, just press again the "CLOCK" and "ON/AUTO/OFF" buttons simultaneously.
UTILIZATION
In accordance to European Directive 2012/19 / EU regarding electrical and electronic equipment, the
WEEE label indicates the need of separate collection of used out electrical and electronic equipment.
Products with such label, under penalty of fine, can not be thrown into ordinary garbage together with
other wastes. These products may be harmful to the natural environment and human health, it requires a
special form of treatment / recovery / recycling / disposal. You can find out about the utilization possibilities of a
worn out device in the appropriate city or commune office.
Elektronischer Zeitprogrammierer, der mit einem Speicherunterstützungssystem ausgestattet ist
Technische Parameter: ~ 230V, 50Hz, 16A, max. 3600W
Systembatterie: Ni-Mh 1.2V - mehr als 100 Stunden Arbeit nach dem Laden
WARNUNG!
Das Gerät sollte nicht an Orten verwendet werden, an denen der Strom des Empfängers 16 A übersteigt. Es sollte
darauf geachtet werden, dass der Stecker des externen Gerätes sowie das Programmiergerät vollständig in die
DE – Bedienungsanleitung