Setting A Middle Position; Deleting The Middle Position - FAAC TM2 ERY Manual De Usario

SETTING A MIDDLE POSITION

This function allows to drive the awning to a favourite middle position. When this
middle position is memorized, just press the stop button for 2 seconds and auto-
matically the motor will move the awning to this position.
To memorize the middle position, move the awning to the desired position and then
hold the STOP button down (for about 4 seconds) until the motor gives confirmation.
Tn: Already programmed remote control
up
down

DELETING THE MIDDLE POSITION

If you want to delete the middle position, it can be done as described below.To chan-
ge this position, it's also necessary to delete first the memorized middle position.
Before deleting the middle position, the awning must go to the middle position by
pressing the STOP button for 2 second, then press the STOP button again (for about
4 seconds) until the motor performs the confirmation movement.
Tn: Already programmed remote control
B
up
Tn (2 sec)
TM2 ERY
B
Tn (4 sec)
B
down
Tn (4 sec)
30 A4518_6G40_Rev.A