Starting And Stopping; Operating Tips - sunjoe 24V-X2-BVM190-CT Manual Del Operador

Fig. 14
Fig. 15
8. With machine on operator's right hand side, place
shoulder strap across chest and over left shoulder.
Operation

Starting and Stopping

m
WARNING!
Before switching on the tool, ensure that it
is not in contact with any object.
1. Insert both batteries into the battery compartments
(Fig. 16).
Fig. 16
2. To start the cordless blower + vacuum + mulcher, slide
the ON/OFF switch forward to show the ON mark
(Fig. 17).
3. To stop the unit, slide the ON/OFF switch backward until
the OFF mark appears (Fig. 17).
Speed Control
This unit is equipped with six variable speed settings (1 to 6)
(Fig. 18).
• Turn the speed dial to position "1" or "2" for
• Turn the speed dial to position "3" or "4" for
• Turn the speed dial to position "5" or "6" for
Fig. 18
Variable
speed
control

Operating Tips

m
daylight or good artificial light.
• When using the blower vac, plant your feet firmly on the
Battery packs
• Wear personal protective equipment during your work
• When using the unit as mulcher, make sure the bag is
• Make sure the blower tube nozzle is not directed at
• Verify that the unit is in good working condition. Make sure
12
Fig. 17
On/Off switch
LOW speeds.
MEDIUM speeds.
HIGH speeds.
WARNING!
Use the blower + vacuum + mulcher only in
ground and place one hand on the unit handle and the
other hand on the auxiliary handle.
session. This includes boots, safety glasses/goggles,
ear defenders, long pants and a long-sleeve shirt.
properly installed and zipped closed.
anybody or any loose debris before starting the unit.
the tubes and guards are in place and secure.