Luminance Brands Kathy Ireland Home LUCERE CF575BQ00 El Manual Del Propietario página 10

3. Ceiling Fan Assembly
3.11
Retighten the Two Phillips Head Set Screws evenly to
secure the Downrod to the Motor Coupler in a vertical
position (Figure 11).
WARNING
!
It is critical that the set screws in the motor coupler are
securely tightened. Failure to verify that the set screws
are properly installed could result in the fan falling.
3.12
Locate the Upper Inner Shade, which is smaller in size
and has a hole in the center.
Route the Four Wires through the Center Hole of the
Upper Inner Shade and slide it down the Downrod.
Position the Upper Inner Shade's Three Flat Areas into
the Fan Motor Housing's Three Raised Dimples, located
on the Upper Inner LED Housing.
Turn the Upper Inner Shade Clockwise until it stops
(Figure 12).
(Continued)
DOWNROD
MOTOR
COUPLER
Figure 11
DOWNROD
UPPER INNER FAN MOTOR
HOUSING RAISED DIMPLES (3)
Figure 12
10
RETIGHTEN
PHILLIPS HEAD
SET SCREWS (2)
UPPER INNER
SHADE
UPPER INNER
SHADE FLAT
AREAS (3)
ETL Model No.: CF575