Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home ZEKE CF444BQ00 El Manual Del Propietario

3.1
Slide a Blade through the Fan Motor Assembly Center
Blade Slot .
Mount the Blade to Fan Motor Assembly using Three
#8-32 x 11 mm Washer Head Blade Screws (supplied)
(Figure 1) .
NOTE: Take care not to scratch Fan Motor
Assembly when installing Blades.
Complete the installation of the remaining Three Blades
per the above instructions .
A spare #8-32 x 11 mm Washer Head Blade Screw is
supplied in the parts bag, if needed .
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
3.2
Remove the Three #6-32 x 3/8" Pan Head Screws
with Lockwashers from the Fan Motor Assembly Hub
(Figure 2) .
Retain the Three #6-32 x 3/8" Pan Head Screws with
Lockwashers for future use .

3. Ceiling Fan Assembly

BLADES (4)
Figure 1
REMOVE THREE #6-32 x 3/8"
PAN HEAD SCREWS WITH
LOCKWASHERS
Figure 2
Please contact 1-800-777-4440 for further assistance
5
#8-32 x 11 mm WASHER
HEAD BLADE SCREWS
(3 per blade)
FAN MOTOR ASSEMBLY
CENTER BLADE SLOTS (4)
FAN MOTOR
ASSEMBLY HUB
luminancebrands.com
ETL Model No.: CF444