Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the fan on an appropriate, flat surface and connect the device to a properly
installed 230V AC socket.
By loosening the tilt angle screw (3), you can now change the tilt angle as desired.
Tighten the screw again subsequently.
Push the knob at the top to start the oscillation. If you do not want to use the
oscillation function, pull the knob out slightly.
You can select between three different speed settings using the rotary switch on
the motor unit.
7 Cleaning
Speed setting
0
1
2
3
Pull out the power plug from the socket before starting with the cleaning process!
Use a slightly damp cloth for cleaning. The device should not be immersed in wa-
ter for cleaning under any circumstances. This could lead to electric shock or fire!
8 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with
mains voltages. Do not short-circuit the product. The device is not certified for use
in the open air; only use it in dry conditions. Protect it from high humidity, water
and snow. Keep it away from high temperatures. Do not subject the device to sud-
den changes in temperature or heavy vibration as this might damage electronic
components. Examine the device for damage before using it. The unit should not
be used if it has received an impact or has been damaged in any other way. Please
observe national regulations and restrictions. Do not use the device for purposes
other than those described in the instructions. This product is not a toy. Keep it out
of the reach of children or mentally impaired persons.
English
Off
Slow
Medium
Fast
25
Publicidad
