EN
Introduction
RE2300 remote control is dainty and delicate, easy to carry. It can
be attached to your key rings, or just put into your pockets or
purses. When you are about to exit or entry the house, you can use
it to arm or disarm the system, In case of emergency, press the
button, the alarm will be activated immediately.
Overview
Arm
Indicator
Arm
Disarm
Stay
SOS
Disarm
Indicator
Guide Point
For The Blind
Metal Ring
LED Indication
+
LED flashes once: Armed or in home mode
×
LED flashes once: Disarmed
+, ×
LEDs flashes once: SOS
Connect Remote Control
[SOS]
Connecting the remote control is to build a wireless connection
between the remote control and the control panel.
1. Control panel enters into the connecting state (For details, please
refer to the relative user manual).
2. Press any key on the remote control, and the control panel beeps
once, indicating a successful connection.
Note:
If the control panel beeps twice when the above operation is done, it
means the remote control has been connected before.
EN