Getting Ready; Cleaning Hard Floors - Bissell POWERFRESH 1940 Serie Guia Del Usuario

Operations

Getting ready

The mop pad may have already come attached
to the mop head, if not follow steps 1a and 1b
below.
1. Add Fragrance Disc and attach mop pad
a. Insert Spring Breeze Fragrance Disc into
pocket inside mop pad. Use the whole disc
for a refreshing scent or cut in half for a
lighter scent.
b. Set mop head in mop pad, making sure
quick-grip release tab is located on the back.
2. Fill the water tank
a. Remove tank by lifting straight up
and away from unit.
b. Unscrew cap at bottom of water tank.
c. Fill water tank with water. For best results,
water should be at room
temperature.
d. Replace the cap, tighten until snug.
e. Replace water tank by gently sliding tank
into place and press down firmly.
3. Twist the Quick Release™ cord wrap clock-
wise to unwrap the power cord completely and
plug into a 120-Volt outlet as described on the
Important Safety Instructions, page 3.
4. SmartSet™ Steam Select Indicator light will
glow when PowerFresh Steam Mop is ready to
use. Press the Steam Level button to choose the
level of steam you desire.
NOTE: Upon first use of the PowerFresh® Steam
Mop or first use after refilling the water tank,
the pump may make a "knocking" sound. This
is normal and should only last a few seconds.
Before you clean
Thoroughly sweep or vacuum floor prior to
cleaning with the PowerFresh® Steam Mop.

Cleaning hard floors

Your PowerFresh® Steam Mop is designed to
clean hard flooring such as ceramic tile, laminate,
marble, stone and sealed hard wood floors. Use
of your PowerFresh Steam Mop on waxed or
some unwaxed floors may result in a diminished
glossiness. The PowerFresh Steam Mop is not
for use on unsealed wood floors. For best results
test in an inconspicuous area and check the care
instructions from your flooring manufacturer.
1. Plug the unit in and wait 30 seconds for it to
heat up. Choose the level of steam to clean your
floor: Low (delicate floors), Medium (regular
cleaning), High (durable floors or sticky messes).
Begin cleaning by slowly passing the unit over
the floor surface.
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
1a.
2a. 2b.
Tip
» Use of distilled or demineralized water is recommended
to prolong the life of your hard floor cleaner. To add
a fresh scent as you clean, try BISSELL demineralized
waters in various scents like Citrus, Eucalyptus Mint and
Spring Breeze.
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
WARNING
Tinted plates on foot may get hot while steam mop is
in use. Do not touch while hot.
www.BISSELL.com
1b.
7