Cleaning Your Hard Floors - Bissell POWERFRESH 2181 Serie Guia Del Usuario

Cleaning Your Hard Floors

NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning
with the PowerFresh® Slim Steam Mop.
YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC
TILE, LAMINATE, MARBLE, STONE AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER.
1
Plug machine
into a properly
grounded outlet.
NOTE: Your Steam Mop may have already come assembled with a mop pad
on the foot. If not, refer to instructions on page 6 in the "Attaching Microfiber
Mop Pads" section to learn how to attach the mop pad.
4
Push the trigger
underneath the handle
of the Handheld Pod
to release steam.
6
8
www.BISSELL.com
2
Make sure the STEAM READY
light is solid before selecting the
appropriate steam level based on
your hard floor cleaning needs.
5
For best results to
sanitize an area of your
floor, use the microfiber
cloth pads and slowly
and evenly stroke your
steam mop back and
forth at least three
times over the area
using continuous steam.
Remove the pad after
use and wash.
3
Step on the side of
the foot to recline the
body of the machine
to begin cleaning.
To easily maneuver and clean
tight spaces such as baseboards,
behind the toilet, and around
furniture, take advantage of the
swivel steering.
7
When finished cleaning, turn
off the machine by pressing
the PAUSE button and
unplugging the unit.