Labels On Incubator - Phcbi MCO-170M Instrucciones De Operación

LABELS ON INCUBATOR

Users are advised to read carefully the warnings and cautions contained on stickers at key locations on the
interior and exterior of the incubator.
Possible Warning/Caution Type
Danger Location of Danger
Burns
Hot Surface
Cooling Unit &
Heat Cover
Personal Hazardous UV Light
injury Interior
Personal Hazardous UV Light
injury Interior
Personal Gas Poisoning or
injury Oxygen Deprivation
Environment
Personal Gas Poisoning or
injury Oxygen Deprivation
Interior
Fire
Combustion-supporting
gas
Environment
Personal Electric shock
injury Top cover
10
Warning/Caution Label Description of Danger
Avoid touching the cooling unit
and heat cover, which can reach
high temperatures and may cause
burns.
The UV lamp is illuminated by
pressing the door switch. Do not
press the door switch: the UV light
is hazardous.
The UV light is hazardous. Never
turn on the UV lamp without the
cover.
When using CO gas, ensure
2
there is adequate ventilation.
Using CO gas in a small room
2
without adequate ventilation may
cause gas poisoning or oxygen
deprivation. In addition, when
opening the incubator doors, do
not directly inhale the air in the
chamber.
Excessive pressure may cause
gas supply lines inside
incubator to come loose, which
may result in gas poisoning or
oxygen deprivation due to the
escape of gas.
O gas has a property that
2
enhances combustion.
care of the handling of flame in a
room where the incubator is
installed.
Never remove this cover. Only a
service personnel remove the
cover to avoid the electric shock.
the
Take