Brandson Equipment 303370 Manual De Usuario página 22

Error
The vacuum cleaner
is not vacuuming
properly.
Dust is coming out of
the vacuum cleaner.
The vacuum cleaner
does not work proper-
ly when the accesso-
ries are attached.
The surface is still very
wet after vacuuming
the fluid.
Fluid is coming out of
the vacuum cleaner.
22
Solution
• The dust collector has to be properly installed.
Otherwise the vacuuming capacity is severely
restricted.
• The dust collector is full. Empty the dust collector.
• The filter unit is clogged. Clean the filter of the
vacuum cleaner.
• The dust collector has to be properly installed.
Otherwise the dust collector is not sealed properly
and dust may come out.
• The dust collector is full. Empty the dust collector.
• Check whether the filter and the filter unit are
properly installed.
• The dust collector is full. Empty the dust collector.
• The relevant accessory is clogged, clean it.
• Check whether the filter and the filter unit are
properly installed.
• Ensure that the fluid attachment is fixed to the
vacuum cleaner.
• Hold the vacuum cleaner at an angle of about 30°
facing downwards properly onto the surface to be
vacuumed. Never tilt the appliance to one side and
ensure that the fluid attachment is touching the
surface.
• The filter unit is wet. Ensure that the filter unit is
dry before inserting the filter into the dust collector.
• Check whether the filter and the filter unit are
properly installed.
• Never exceed the maximum level marking for
liquids in the dust collector.
English