Replacing The Pilot Burner Nozzle; Commissioning - ALI PROXE70 Instrucciones Para Instalación, Uso Y Mantenimiento

REPLACING THE MAIN BURNER NOZZLE AND
ADJUSTING THE PRIMARY AIR FLOW.
•
Remove the control panel.
•
Loosen the screws V.
•
Remove the nozzle-support manifold.
•
Slacken screw V.
•
Remove nozzle UM and replace it with the one indicated
in table T1.
•
Retighten nozzle UM.
•
Adjust air regulator Z to distance A as shown in table T1.
•
Retighten screw V fully.
•
Re-assemble all parts. For assembly, proceed in reverse
order.
REPLACING THE MINIMUM ADJUSTMENT SCREW (only
on versions with tap)
•
Remove the control panel.
•
Remove nozzle UM and replace it with the one indicated
in table T1.
Instructions for installation
•
•

REPLACING THE PILOT BURNER NOZZLE

•
•
•
•
•

13. COMMISSIONING

See Chapter " INSTRUCTIONS FOR MAINTENANCE".
Retighten nozzle UM.
Re-assemble all parts. For assembly, proceed in reverse
order.
Remove the control panel.
Undo connector R.
Remove nozzle UP and replace it with the one indicated
in table T1.
Retighten the connector R. Re-assemble all parts.
For assembly, proceed in reverse order.
25